Angled Touch Positioning Switch [CSHP]
M8mm
Angle touch & IP67
A linear movement ball bearing makes it optimum for slide, deflection angle and offset contacts.
IP67 protective structure, can be used in harsh environment.
-
5μm in repetitive accuracy
The precision positioning switch using no amp does not cause signal point drift due to external environment or self-generation and can output stable high precision signals.
This position switches endure 10 million times operation mechanically and electrically.
-
IP67 protective structure
Can be used in harsh environment.
The special coating gum has been adopted for waterproof and is applicable to water as well as a wide range of coolant (especially for alkaline).
Related Applications
Contact type switch enables stable detection without being affected by external environments
Achieves precision positioning in poor environments with spattering
Correct the deviation of printing drums in micron increments
Eliminated the need for the intermediate actuator by replacing proximity sensors
Realizes significant cost reduction in detecting double sheet metal feeding
A replacement of the fiber sensor realizes high precision positioning
Metrol VS Competitor
 |
Metrol's Positioning Switches [CSHP] |
Micro switch / Limit switch |
Proximity sensor / Photo sensor |
|---|---|---|---|
| Switch structure | Contact type Precision machines |
Contact type Snap-action type |
Non-contact type Magnetism / Light |
| Repeatability |  5μm |
 Approx. 100μm |
10μm |
| Movement differential | None |
Occur |
|
| Temperature drift / Influence on external environment |
Not affected |
Not affected |
Affected (by temperature, lighting intensity, or self-generation) |
| Protective structure | IP67 Can be used under harsh environment where coolant splatter |
IP40 - IP67 Not suited in harsh environment |
|
| Contact life time | 10 million times | 100,000 - 50,000 | None Many elements damaged due to overcurrent |
Product Lineup
[No LED type]
| Product No. | Output mode | Mounting size |
Stroke | Contact angle | Download | Price | Order | ||
|---|---|---|---|---|---|---|---|---|---|
| Catalog | CAD | ||||||||
 |
CSHP085A | A: NO (Normally Open) |
M8mm | 2.8mm | Angle touch |
2D / 3D | 14520 JPY | ||
 |
CSHP085B | B: NC (Normally Close) |
M8mm | 2.8mm | Angle touch | 2D / 3D | 14520 JPY | ||
[with LED type] (120mm from the switch)[?] About LED
| Product No. | Output mode | Mounting size |
Stroke | Contact angle | Download | Price | Order | ||
|---|---|---|---|---|---|---|---|---|---|
| Catalog | CAD | ||||||||
 |
CSHP085A-L | A: NO (Normally Open) |
M8mm | 2.8mm | Angle touch |
2D / 3D | 15015 JPY | ||
 |
CSHP085B-L | B: NC (Normally Close) |
M8mm | 2.8mm | Angle touch | 2D / 3D | 15015 JPY | ||
 |
 To customers in the USA.Metrol precision limit switches are now available through Automation Direct, a direct seller where low prices, fast shipping and superior service offer the most common-sense way to buy industrial controls. |
|---|
Specification
| Switch structure | Dry contact |
|---|---|
| Repeatability | 0.005mm (Range / Axial direction) (At operating speed 50-200mm/min) |
| Pretravel | 0.3mm |
| Protective structure | IP67 |
| Contact force | 1N (Axial direction) |
| Contact life time | 10 million |
| Movement differential | 0 |
| Temperature drift | 0 (Because of no amplifier) |
| Case material | SUS 303 |
| Contact material | SUS, Hardened HRC45-50 |
| Plunger shaft | No rotation stopper |
| Cable | Cabtyre cable 2m Oil resistant φ2.8 / 2 cores, Tensile strength 30N, Minimum bending R7, AWG 26 |
| Oscillation | 10-55Hz total amplitude 1.5 for X, Y, Z each direction |
|---|---|
| Impact | 300m/s² for X, Y, Z each direction |
| Operating temperature range | 0℃-80℃ (Ice-free) |
| Contact rating | DC5V-DC24V Steady current : 10 mA or less (Rush current: 20 mA or less) |
| Standard accessory | Two fixing nuts |
| Circuit diagram |  When using the switch with LED option, limit the current below 10mA. |
The Pride of Japan Technology
-
[History of Development]
A switch that is both Waterproof and RobustCS Touch Switch [CSH Series] makes it possible to support workpieces
from all directions.
The [H] in the model name stands for Japanese word "Henkaku",
which means "Angled touch".Adopts a linear bushing bearing that is strong against vibration and shocks,
as a long-time selling product for Metrol...